Academic

Education

University of Colorado Boulder

Years: 2025-Present

Degree: M.S. Electrical Engineering


University of Illinois Urbana-Champaign

Years: 2021-2025

Degree: B.S. Electrical Engineering, Minor in Computer Science

Research Statement

I am interested in improving the operational capabilities of high-frequency, high power-density-based converters by decreasing their loss mechanisms and minimizing the volume of passive components. In the future, I aim to develop high-performance, high-efficiency power electronics that will further encourage the adoption of electric transportation.

Current Research Experiences

At CU Boulder, my work has centered around power electronics simulation, controls, design, and hardware validation. My current projects include: a point-of-load (PoL) cascaded TSAB + multiphase buck converter for space applications and the thermal modeling of high power-density hybrid switched-capacitor converters (with the intent of developing an improved cooling method).

Previous Research Experiences

At UIUC, my curiosity for sustainable technology inspired me to collaborate with the Haran Research Group at the Grainger Electric Machinery Laboratory under Professor Kiruba Haran. In the spring of 2023, under the supervision of Anjana Samakaroon, a PhD candidate, I contributed to the development of an electric motor coil winding lifetime model by measuring the voltages at which the insulation deteriorates. After analyzing results from these first batches, the team was able to make initial conclusions about the winding degradation. This opportunity taught me about the importance of the operating environment: Ensuring high-reliability in electric aircraft propulsion cannot be accomplished without accounting for environmental parameters and constraints. In the Fall of 2024, I worked on building upon Mr. Samakaroon's insulation reliability model by designing the PCB layout for a 1500V SiC PWM inverter circuit intended to better simulate in-flight conditions. Anubhav Bose, a PhD candidate, acted as a mentor for this project, and I revamped his schematic capture before continuing to the 4-layer board layout. Working in Altium Designer, I researched all the international standards for safety and reliability with high-voltage PCBs, selected the stack-up layers and split-plane configuration, and designed for manufacturability. The board was completed, but never sent to the fabrication facility.

My experiences in the Haran Group have also taught me invaluable research skills in sourcing materials, running experiments, and setting up data collection methods. In the Fall of 2023 (as an undergraduate junior), I joined the Center for Optimization of Electro-Thermal Systems (POETS) and assisted with experimental setup tasks related to superconducting electric machines. Given the exciting new topic, I familiarized myself with the equipment necessary to study superconducting environments, namely cryocoolers and vacuum chambers. I validated the assembly of a cryocooler-attached synchronous machine, helping the team catch a mechanical design flaw. Afterwards, I primarily focused on instrumentation, and partnered with Himalaya Rautela, an M.S. student, to solder, install, and collect data from more than a hundred Resistance Temperature Detectors (RTDs) for a number of experiments related to the thermal modeling of superconducting systems. This research effort ultimately culminated with a $2.7 million FAA grant to further support the testing of electrified propulsion technology. During these two semesters of research, I gained an appreciation for the thermal and material properties of superconducting electric machines, and cultivated a mindset to solve hands-on problems.

In freshman year, I joined Professor Arijit Banerjee's group as an undergraduate labratory assistant. During my time in the Advanced Power Applications Lab, I designed acrylic safety enclosures for two graduate students' power electronic research, ensuring compliance with safety regulations. I decided on optimal fan placement and open front sheet for wires; explored wire tension mitigation strategies and settled on cable fixing plates that mounted on the lower acrylic sheet; utilized Adobe Illustrator to implement design; laser cut acrylic sheets; chemically bonded acrylic sheets using Weld-On 4 Acrylic Cement for increased durability and safety; and drilled additional holes for PCB and cable-fixing plate mounting.

Publications & Presentations

Effects of Device and Gate Driver Designs on the Performance of Point-of-Load Power Converters using E-Mode GaN FETs

Venue: In Proceedings of GOMACTech 2026

Authors: Aarranon Bharathan, Omkar Kulkarni, Antuwon H. Butler, Michael J. Podel, Thomas E. Byrd, Robert P. Strittmatter, Dragan Maksimović


Design of a High-Voltage Power Distribution System for a 90-Seater Electric Aircraft

Recognition: First Place Winners of the Student Design Competition, IEEE/AIAA Transportation Electrification Conference + Electric Aircraft Technologies Symposium (ITEC+EATS) Summer 2025

Authors: Omkar N. Kulkarni, Mudith Witharamalage, Anubhav Bose


Poster Presentation: Introducing Calypso, Illini Solar Car's Next Generation Vehicle

Venue: Power and Energy Conference at Illinois (PECI), 2024

Authors: Omkar Kulkarni, Mia Mikolajczak